Framed Insect Specimen Nameplates: Butterfly, Beetle and Moth Display Plates
Wording Guide

Framed Insect Specimen Nameplates: Butterfly, Beetle and Moth Display Plates

A framed butterfly without a nameplate is just pretty wings. A short engraved plate tells visitors what the insect is, where it came from and when it was mounted, so a framed specimen reads as a collection piece instead of decoration. Here is what to engrave on a framed insect plate, with wording ideas for morphos, beetles, moths and bees, plus plate materials, sizes and mounting.

Framed blue morpho butterfly specimen with an engraved brass insect nameplate reading Morpho peleides, Common Morpho, Costa Rica 2024

Why Put a Nameplate on a Framed Insect

A framed insect is art and science at the same time, but only the plate says which. Without one, a visitor sees a beautiful blue butterfly and nothing else. With one, they learn it is a Morpho peleides, where it came from, and when it was mounted. That is what turns a framed specimen from decoration into a collection piece.

Whether you sell framed insect specimens or keep them in a personal collection, a butterfly nameplate or a set of insect display plates is the finishing detail. The same plate style doubles as entomology labels for a research or teaching collection, where the scientific name and collection data matter most.

What to Put on a Framed Insect Specimen Nameplate

Most good insect plates answer four questions, in this order:

  1. Scientific name: the headline, in the largest letters. Morpho peleides, Attacus atlas, Dynastes hercules. In print, scientific names are usually italic; on an engraved plate they are most often set in capitals, as in the photo. Check your proof and pick one style for the whole collection.
  2. Common name: Common Morpho, Atlas Moth, Hercules Beetle. This is the line a non-specialist visitor actually reads first.
  3. Origin: where the specimen came from. Costa Rica, Peru, Thailand. For farmed specimens, the farm country is the honest origin line.
  4. Year: the year collected or mounted, such as 2024. For a historic specimen, the collection year matters as much as the species.

Two to four short lines fit nicely on most frame plates. A framed insect is small, so keep the wording short; the plate should not overpower the specimen.

The Example in the Photo

The morpho butterfly plate at the top of this page reads:

  • MORPHO PELEIDESCommon Morpho
    Costa Rica • 2024

Brass on a light mount board is the classic framed-insect look: warm, quiet, and it does not compete with the blue wings. The scientific name on top, the common name below it, and origin and year on the last line is a layout that works for almost any framed insect.

More Framed Insect Specimen Wording Ideas

Use these as templates for moths, beetles, bees and butterflies. Replace the details with your own specimen's:

  • ATLAS MOTHAttacus atlas
    Southeast Asia • 2023
  • HERCULES BEETLEDynastes hercules
    Ecuador • 2024
  • DEATH'S-HEAD HAWKMOTHAcherontia atropos
    Southern Europe • 2022
  • BLUE BANDED BEEAmegilla cingulata
    Australia • 2024
  • SUNSET MOTHChrysiridia rhipheus
    Madagascar • 2023

Keep the name order, capitalization and origin format consistent across every frame in a collection, so a wall of insects reads as one set.

Choosing the Plate Material, Size & Mounting

Material. Brass on a light mount board is the classic framed-insect choice. Black brass (black plate, gold letters) looks sharp on a dark frame. Nickel silver is a good match for a cooler, silver look. You can see the available metals and finishes in our Custom Rectangular Nameplates collection.

Size. Framed insects usually take a small plate, around 1" x 3" up to 3" x 6", small enough to sit in a corner of the frame without covering the specimen. Larger shadow boxes, a beetle display or a multi-insect display can take 2" x 4" and up. We cut custom sizes, so if a frame has a space that needs a specific size, tell us.

Mounting. Plates can be mounted with 3M adhesive for a clean look with no visible hardware, or with screw holes for a more permanent hold. For framed specimens, adhesive is the usual choice, since it avoids extra holes in the mount board. Choose the mounting when you design the plate.

For Insect Artists, Dealers & Collectors

If you frame and sell insects, a consistent nameplate is a finishing touch customers notice, and engraved nameplates are the simplest way to get one. It also makes a piece easier to sell, because the buyer leaves with the identification, not just the frame. We work with insect artists and dealers who order plates in batches, and we can keep a layout on file so repeat orders are quick. For a batch of plates, email us the list of names and details, ideally as a spreadsheet, and we'll quote the order. We send a proof before engraving.

Tips for Great Insect Specimen Wording

  • Spell-check scientific names. We engrave exactly what you give us, so a typo in a Latin name is permanent.
  • Keep lines short. Shorter lines allow bigger, more readable letters, and a framed insect has very little room to spare.
  • Use one name order everywhere: scientific name first, common name second.
  • Check the proof. Preview your plate in the design tool before you order.
  • Plan for the future. If you'll add frames every season, keep the size and style the same so the wall matches.

Frequently Asked Questions

What should I put on a framed insect nameplate?

The scientific name, common name, origin and year. Those four lines cover identification and provenance.

Should the scientific name be italic?

In print, yes. On an engraved plate, capitals are the usual style, as in the morpho example. Pick one style and use it across the whole collection.

What size plate do I need for a framed butterfly?

Usually 1" x 3" to 3" x 6", small enough to sit in a frame corner. We also cut custom sizes.

What material looks best with framed insects?

Brass suits light mount boards and dark frames; black brass with gold letters is the sharpest contrast on a dark frame.

Can I order plates for a whole series at once?

Yes. Email us the list as a spreadsheet and we'll quote the batch and send a proof before engraving.

How is the plate attached to a frame?

3M adhesive backing is the usual choice for framed specimens, for a clean look with no visible hardware; screw holes are available for a more permanent mount.

Ready to Label Your Framed Insects?

Pick your size and finish, add your scientific name, common name, origin and year, and preview the plate before you order. Questions? Email us and we'll help with the wording.

Browse Nameplates   Email Us

Related: Mineral Specimen Labels  |  Fossil Display Plaques  |  Animal Skeleton Museum Labels  |  Historical Artifact Display Plaques  |  Taxidermy Plaque Wording Ideas

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.